PowerPac 2000 DC/AC

sine wave inverter 2000 W

The robust and scalable PowerPac 2000 DC/AC inverter with a (single) power up to 2000 watts offers a very high efficiency and can be operated independently or mounted in a 19-inch rack system. The RS-485/CAN bus can be used for control, monitoring and setup. Detailed status and statistics can be found. The bus is available at the signal terminals and is used to connect multiple units in a redundant or parallel system. The signal connections also provide alarm relay outputs. The PowerPac 2000 DC/AC can be configured by software according to customer specifications. The Sinus inverter is protected against overvoltage, overcurrent, short circuit, reverse polarity reversal polarity and typical environmental influences of the defense industry.

Technical specifications

Input voltage

16-34 V_DC

Input current

≤ 115 A @ 20 V_DC
≤ 68 A @ 34 V_DC

Output voltage

200-240 V_AC / 50 Hz
100-120 V_AC / 60 Hz
Standard: 230 V_AC / 50 Hz

Frequency

50/60 Hz ±0.1 Hz

Output power

2000 W: 20-34 V_DC
1800 W: 18-34 V_DC
1600 W: 16-34 V_DC

Output current

9 A @ 120 V_AC
9 A @ 230 V_AC

Efficiency

≥ 88 % @ 20 V_DC
≥ 90 % @ 34 V_DC

Overload

105-115%, 120 sec
115-150%, 10 s
shut down, re-power to recover

Short circuit current

≤ selected current limit +70 %
shut down, re-power to recover

Security

Interfaces (Input)

Connector (negative): Allied Electronics Corporation MG 02R 20-2P-SQF 36 126 LT-003E-RT. Bayonet
Connector (positive): Allied Electronics Corporation MG 02R 20-2P-SQF 36 123 LT-00
S3E-RT. Bayonet

Interface (Output)

Connector: 97B-3102E-16-10S or equivalent. Bayonet

Dimensions[WxHxD]

220 x 132 x 420 mm

Weight

16 kg

Environmental specification

IP65
MIL-STD-810G
RoHS

Temperature range [operating]

-40°C to+60°C

EMI

Designed to meet MIL-STD-461F: CE101, CE102, RE101, RE102, RS103, CS101, CS114, CS115 and CS116
Electrical systems in vehicles acc. to MIL-STD-1275E.
Electrostatic discharge acc. to EN 61000-4-2 for ESD